Pressure Washing in Hernando & Pasco Counties, FL

It can if done incorrectly—that's why technique matters more than raw pressure. We adjust PSI and nozzle tip for each surface: concrete driveways can handle 3,000+ PSI with a 25-degree tip, but vinyl siding gets a wider fan at 1,200-1,500 PSI to avoid cracking or forcing water behind the panels. We also soft-wash painted surfaces and stucco using low pressure with a cleaning solution.

Once or twice a year is ideal for most Hernando County driveways. The combination of humidity, rain, and shade creates perfect conditions for algae and mildew growth, especially on north-facing surfaces. Homes near wooded areas or with heavy tree canopy may need it every 6 months to prevent permanent staining.

Those black streaks are Gloeocapsa magma—a type of algae—and they respond well to a soft-wash treatment using a sodium hypochlorite solution applied at low pressure. We never use high-pressure water on roof shingles because it strips the protective granules and voids most manufacturer warranties.

Not necessarily, as long as we have access to an outdoor water spigot and the areas being cleaned. We do ask that windows and doors are closed, cars are moved away from the work area, and any fragile outdoor items like potted plants are relocated. We'll send a photo of the finished work if you're not present.

Yes, though results depend on how long the oil has been sitting. Fresh oil stains respond well to a degreaser pre-treatment followed by hot-water pressure washing at 3,000+ PSI. Old, deeply penetrated stains may lighten significantly but can leave a ghost mark. We're upfront about what's achievable before we start.

Yes, with the right approach. We use moderate pressure—around 2,000 PSI—with a surface cleaner attachment that distributes water evenly and prevents streaking. If your pavers have polymeric sand in the joints, we take extra care to avoid displacing it, and can resand joints afterward if needed.