Faucet & Fixture Swaps in Hernando & Pasco Counties, FL
Hernando's Handy Neighbor offers faucet & fixture swaps across Hernando and Pasco Counties, FL. Quick, leak-free replacement of kitchen and bathroom faucets, shower heads, and minor fixtures. We swap existing fixtures — no new plumbing lines, just better hardware.
30 Min-1 Hour · starting at $150· 90-day workmanship guarantee
The short version
Hernando's Handy Neighbor provides professional faucet & fixture swaps across Hernando and Pasco Counties, FL, starting at $150. Most jobs finish in 30 min-1 hour, with a $150 minimum service call and same-day availability for calls booked before 10 AM.
- Starting price
- $150
- Typical time
- 30 Min-1 Hour
- Service area
- Hernando & Pasco Counties
- Minimum call
- $150
- Phone
- (352) 327-7737
Common questions about faucet & fixture swaps
Quick answers to the 6 questions we hear most about faucet & fixture swaps.
Can you replace my faucet with any brand or style?expand_more
As long as the new faucet fits the existing sink configuration (number of holes and hole spacing), any brand works. One-hole, three-hole, and widespread are the common configurations. We check your setup first and let you know what will fit without modification.
How long does a faucet replacement take?expand_more
A straightforward swap takes 30 to 45 minutes. If the shut-off valves are corroded, the supply lines are old, or the connections are hard to access, it can take up to 90 minutes. We always test for leaks before calling it done.
My faucet drips. Should I repair it or replace it?expand_more
If the faucet is more than ten years old, replacement is usually more cost-effective than chasing internal cartridge or seal failures. A new faucet also comes with a manufacturer warranty. For newer faucets, a cartridge replacement may be the simpler fix.
Do you replace the supply lines too?expand_more
Yes — we recommend replacing the supply lines whenever we swap a faucet. Old supply lines (especially the original rubber or chrome-plated copper ones) are the number-one source of under-sink leaks and water damage. Braided stainless supply lines cost a few dollars and last much longer.
Can you install a hands-free or touchless faucet?expand_more
Yes. Touchless faucets typically require a battery pack or plug-in power adapter under the sink in addition to the water connections. We handle the complete setup including calibrating the sensor.
Will you replace shut-off valves if they are corroded?expand_more
We can replace compression-style shut-off valves with modern quarter-turn ball valves in most cases. If the water supply pipe itself is corroded or the connection requires soldering or pipe work beyond a simple valve swap, that may need a plumbing specialist.
How does our faucet & fixture swaps process work?
Every job follows a consistent process to ensure quality results.
Assessment & Shut-Off
We verify the new fixture will fit the existing sink configuration, then turn off the water supply at the shut-off valves under the sink. If the valves do not hold, we shut off at the main.
Old Fixture Removal
The existing faucet is disconnected from the supply lines and removed from the sink. We clean the mounting surface and inspect the sink and countertop for any damage or mineral buildup.
New Fixture Installation
The new faucet is mounted per manufacturer instructions, with new gaskets and mounting hardware. Supply lines are connected — we install new braided stainless lines unless the existing ones are recently replaced.
Leak Testing & Cleanup
We turn the water back on and run the faucet through hot and cold cycles while checking every connection point for leaks. Under-sink area is dried and checked once more after five minutes of use.
What's included in our faucet & fixture swaps service?
Need it done today?
We prioritize urgent repairs. Call us before 10 AM for same-day availability.
How much does faucet & fixture swaps cost?
The main cost variable is the complexity of the existing plumbing. A simple swap with accessible connections costs less than one that requires shut-off valve replacement or corroded fitting removal. The faucet itself is typically purchased by the homeowner.
Shower head swap
$150
Starting price · 0.25-0.5 hours
Bathroom faucet replacement
$175
Starting price · 0.5-1 hours
Kitchen faucet replacement
$200
Starting price · 0.75-1.25 hours
Faucet + supply line replacement
$225
Starting price · 1-1.5 hours
Minimum service call: $150
Final pricing based on inspection. No hidden fees.
Get a Free Estimate
Describe your project and we'll get back to you within a few hours.
Prefer to Call?
Call us directly for same-day service or urgent repairs. We answer during business hours and return calls within an hour.
(352) 327-7737What Happens Next
We review your request and call you back within a few hours.
We provide a clear quote with no hidden fees.
We schedule at your convenience — often same-day or next-day.
Fully Insured
Mon-Sat 8am-6pm
What other services pair well with faucet & fixture swaps?
- plumbingToilet Replacementarrow_forward— Swapping old toilets for new — including comfort-height upgrades.
- accessibleGrab Bars & Safety Railsarrow_forward— Aging-in-place safety installations for bathrooms and throughout the home.
Also available in: Brooksville · Spring Hill · Weeki Wachee · Hernando Beach · Ridge Manor · Masaryktown · Nobleton · Dade City · New Port Richey · Zephyrhills