Professional Door Repairs in Dade City, FL

The most common cause in Florida is humidity-related wood expansion—the door absorbs moisture and swells, especially during summer. Foundation settling is another frequent cause in Hernando County, where sandy soil allows slight shifts that pull door frames out of square. Loose hinge screws, worn-out weatherstripping, and paint buildup on edges are other common culprits.

Yes—in most cases, the rollers at the bottom of the door are worn out, dirty, or misadjusted. We clean the track, adjust or replace the rollers, and lubricate with a silicone-based lubricant. If the track itself is bent or corroded, we can straighten minor bends or replace the track section. A sliding door that takes two hands to open usually just needs new rollers.

First, we check whether the hinge screws have pulled out of the jamb—this is the most common cause. A 3-inch screw driven through the top hinge into the wall framing behind the jamb often lifts the door right back into position. If the frame itself has shifted, we may need to shim the hinges, adjust the strike plate, or plane the door edge for clearance.

Absolutely. Replacing handles, deadbolts, hinges, and strike plates is straightforward and one of the most common door repairs we do. If the new hardware has a different bore size or backset than the original, we modify the door to fit. Upgrading to modern hardware can also improve both security and appearance.

Usually both. We check the door's fit in the frame first—if there are visible gaps when the door is closed, the door may need hinge adjustment, a new threshold, or planing. Then we replace worn weatherstripping around the full perimeter. The bottom sweep or door shoe is often the biggest source of drafts and is a quick, high-impact replacement.

Holes and dents in hollow-core doors can often be repaired with an expanding foam filler, followed by a hardening compound, sanding, and paint. Small holes under 3 inches respond well to this method. Larger damage or holes near the edges where the door is thin may justify replacement, especially since basic hollow-core doors are inexpensive.

Yes—we install pre-hung interior doors (door with frame as a unit) and slab-only doors (just the door, hung on existing hinges and frame). Pre-hung doors are faster and give better results when the existing frame is damaged or out of square. Slab doors work well when the frame is solid and you just want a fresh door face.